Pumps

Vertical cantilever sump and process pump (API VS4) for corrosive, hot, and difficult pit-drainage duty.

The industry-standard ANSI end-suction process pump, now with i-FRAME intelligent monitoring for longer bearing life.

ANSI-dimension sealless mag-drive process pump engineered for easy maintenance and reliable chemical containment.

ETFE-lined magnetic-drive process pump with zero leakage for hazardous and corrosive chemical service.

Two-stage horizontally split-case pump for high-head boiler feed, mine dewatering, and pressure boosting.

Single-stage double-suction split-case pump for high-flow water supply, HVAC, and cooling-tower circulation.

API 610 (BB3) axially split multistage pump for high-pressure pipeline, boiler-feed, and refinery service.

API 610 (OH2) overhung single-stage process pump for high-temperature, high-pressure hydrocarbon service.

Self-priming ANSI process pump that clears its own suction line — ideal for lift and intermittent-duty chemical service.

Submersible effluent pump for septic effluent, dewatering, and light solids-handling in mounds and lift systems.

Submersible sewage pump that passes 2-inch solids for lift stations, mobile-home parks, and raw-sewage duty.

Higher-capacity submersible sewage pump for commercial and municipal lift-station duty with large solids passage.

Extra-heavy-duty slurry pump for the most abrasive mining and mineral-processing service.

High-capacity 4-inch stainless submersible for larger irrigation, municipal, and commercial groundwater duty.

Stainless horizontal multistage pump for boosting, washdown, and general water supply in a compact footprint.

Stainless vertical multistage pump for pressure boosting, water treatment, and general high-head water supply.

Packaged multistage booster for residential and light-commercial constant-pressure water supply.

4-inch stainless submersible well pump line with strong sand-handling for residential and agricultural groundwater.

Submersible grinder pump that shreds sewage for low-pressure sewer systems and residential lift stations.

Horizontal split-case pump for high-flow municipal water, HVAC, and fire-service circulation.

Rubber- or metal-lined slurry pump for a wide range of corrosive and abrasive slurries.

Fiberglass-reinforced ANSI process pump for highly corrosive acids and chemicals that attack metal.

Close-coupled 316 stainless end-suction pump for clean water, light chemical, and general transfer duty.

Vertical cantilever, recessed-impeller sump pump for slurries and solids-laden liquids with no submerged bearing.

Vertical industrial turbine pump for deep-well, booster, and high-flow lift across a very wide performance range.

Elastomer/metal-lined heavy-duty slurry pump for abrasive and corrosive mineral slurries.

Heavy-duty air-driven piston pump for high-performance grease and high-viscosity material transfer.

2-ball air-driven piston pump for high-flow paint circulation and supply without sacrificing pressure.

Air- or electric-driven high-pressure grease pump for automated and manual lubrication systems.

Electric 4-ball piston circulation pump for energy-efficient, smooth paint circulation in finishing systems.

Extended-durability air piston supply pump engineered for long service life in paint circulation.

Field-proven air-operated piston pumps for oil and grease dispensing from drums and containers.

1-inch air-operated double-diaphragm pump with a stall-free air valve for smooth, leak-free general transfer.

High-flow 1½-inch air-operated double-diaphragm pump delivering up to 120 GPM in a compact, portable body.

1½-inch plastic (PP/PVDF) air-operated double-diaphragm pump for corrosive chemical transfer.

2-inch air-operated double-diaphragm pump for higher-flow transfer of chemicals, wastewater, and solids-laden fluids.

3-inch air-operated double-diaphragm pump delivering up to 300 GPM for the highest-flow AODD transfer duty.

½-inch air-operated double-diaphragm pump for low-flow transfer of chemicals, coatings, and shear-sensitive fluids.

¾-inch metal air-operated double-diaphragm pump for general chemical and fluid transfer.

High-ratio air-driven piston pump for high-pressure supply of heavy coatings, sealants, and adhesives.

Light-duty oil transfer piston pumps for shops and service garages dispensing from drums.

Compact air-driven piston pump for spray finishing and precise material supply of paints and coatings.

Electric double-diaphragm pump that cuts energy use up to 80% versus air-operated, with sealless, self-priming operation.

Sanitary air-operated double-diaphragm pumps (3-A/FDA) for hygienic transfer of food, beverage, and personal-care products.

Sanitary drum and bin unloading systems for evacuating high-viscosity food and personal-care products with minimal waste.

Single-roller peristaltic hose pump for accurate metering and transfer of abrasive, caustic, or shear-sensitive fluids.

Air-operated diaphragm finishing pump — a cleaner, more consistent alternative to pressure pots for spray supply.

Heavy-duty high-pressure piston pump for protective coatings and high-solids materials.

Value-focused ECM circulator for residential heating with simple proportional-pressure control.

Compact residential/light-commercial ECM circulator with AutoAdapt for hands-off, energy-efficient heating circulation.

High-pressure booster modules for reverse-osmosis, desalination, and demanding water-treatment duty.

Compact horizontal multistage end-suction pumps for boosting and general water supply; CME adds integrated variable speed.

Plug-and-pump horizontal multistage booster with a permanent-magnet variable-speed motor and built-in constant-pressure control.

The workhorse vertical multistage pump for pressure boosting and process duty; CRN adds full stainless-steel wetted parts.

Variable-speed diaphragm dosing pump for medium-capacity chemical metering with wide turndown.

High-pressure diaphragm/plunger metering pump built to API 675 for precise, demanding chemical injection.

Mechanically actuated diaphragm dosing pump for robust, higher-capacity chemical metering.

Compact submersible drainage and effluent pumps for building services, effluent transfer, and light wastewater.

Rugged submersible dewatering pumps for construction sites, quarries, and mines handling gritty, abrasive water.

Multi-pump packaged booster system with advanced cascade control for demanding commercial and municipal supply.

Variable-speed multi-pump booster set for commercial water supply and pressure boosting.

Fixed- and proportional-pressure ECM circulator for heating and cooling loops where a sensor-driven MAGNA3 isn't required.

High-efficiency ECM circulator for heating, cooling, and hot-water systems, with built-in differential-pressure control.

Immersible vertical multistage pump for machine-tool coolant, condensate, and light industrial circulation.

Close-coupled single-stage end-suction pump for water supply, HVAC, and general transfer across a broad duty range.

Heavy-duty ISO/ANSI end-suction process pumps for industrial and mildly aggressive fluid service.

Long-coupled, frame-mounted end-suction pump sharing the NB hydraulics for serviceable industrial and HVAC duty.

UL/FM fire-protection pumps and packaged systems in end-suction, split-case, and vertical-turbine configurations.

All-in-one self-priming water booster with integrated motor, tank, sensor, and controls for whole-home pressure.

Compact integrated booster that maintains perfect constant pressure across multiple fixtures automatically.

Installation-flexible submersible sewage pumps, available for both wet-pit and dry-pit lift-station setups.

Submersible grinder pump that shreds solids for pressurized sewer systems and small lift stations.

Submersible sewage/wastewater pumps with S-tube or SuperVortex impellers for high solids passage and efficiency.

Stepper-driven digital diaphragm dosing pump with flow measurement and an enormous turndown for precise chemical injection.

Compact digital diaphragm dosing pumps for accurate, everyday chemical metering in water and process systems.

All-stainless submersible borehole pump line for groundwater supply, from domestic wells to municipal and irrigation duty.

Compact 3" stainless submersible well pump with built-in protection; SQE adds constant-pressure speed control.

Renewable-ready submersible well pump that runs on solar, wind, battery, or grid power for off-grid water supply.

Close-coupled single-stage in-line pumps for heating, cooling, and water-supply loops; TPE adds integrated variable speed.

Versatile single-stage submersible drainage/wastewater pump that passes small solids and fibers.

Small submersible drainage pumps for cellars, pits, and grey-water removal in homes and buildings.

Proven fixed-speed wet-rotor circulators for hot-water recirculation and small heating/cooling loops.